Self-adhesive, hook-and-loop fasteners blend into glass or plastic surfaces for an inconspicuous look. Clear fasteners eliminate the need to match the fastener color to your decor or background. Water-resistant design provides reliable use both indoors and outdoors.
Self-adhesive, hook-and-loop fasteners blend into glass or plastic surfaces for an inconspicuous look. Clear fasteners eliminate the need to match the fastener color to your decor or background. Water-resistant design provides reliable use both indoors and outdoors.
No need to match fastener color to décor or project
Shape:
Circles
Care and Application:
Instructions:
Clean and dry surface before application
Peel tape from fastener and press firmly into place
Adhesive reaches maximum strength after 24 hours
Note: Not recommended for fabrics, dashboards, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
Stick the ball on the adhesive which is on your substrate and pull it off
Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
