VELCRO® Sticky Back 5/8in Circles White 100 ct - 0.63" Diameter - White - For Mounting, Multi Surface, Glass, Tile, Plastic, Metal, School, Office, Home - 100 / Pack
SKU: VEK90204
UOM
Description
Round hook fasteners adhere to most smooth surfaces
Ideal for use on walls, glass, tile, plastic or metal
Round hook fasteners adhere to most smooth surfaces and can be used on walls, glass, tile, plastic or metal. Fasteners with hooks only, not with loops, work with other VELCRO Brand fasteners.
Round hook fasteners adhere to most smooth surfaces and can be used on walls, glass, tile, plastic or metal. Fasteners with hooks only, not with loops, work with other VELCRO Brand fasteners.
Peel tape from fastener and press firmly into place.
Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.
Removal Instructions:
Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
Stick the ball on the adhesive which is on your substrate and pull it off
Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
