Shopping Cart

0 Item(s) - $0.00

StarTech.com Cat.6a STP Patch Network Cable - 35 ft Category 6a Network Cable for Network Device, Hub, Switch, Router, Print Server, Patch Panel, Computer, VoIP Device, PoE-enabled Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - 10 Gbit/s - Shielding - Gold Plated Connector - Gold Plated Contact - CMG - 26 AWG - Blue - 1 Each

SKU: STCC6ASPAT35BL

Description
  • HIGH PERFORMANCE CAT6a Ethernet CABLE: 100% copper for consistent & error-free 10 gigabit connection. Fluke tested complies with ANSI/TIA-568-D Category 6 requirements; ETL Certified Wiring
  • PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference compatible w/ multi-speed 10Base-T/NBASE-T generation
  • SPECS: 10 GbE | Length: 35 ft (10.5 m) | Color: Blue | Structure: 4 Pair STP | Connector: Snagless | Jacket Type: PVC |Wire Gauge: 26 AWG Copper| Wiring Standard: ANSI/TIA-568-D | Warranty: Lifetime
  • QUALITY CONSTRUCTION: 50-micron gold-plated connectors for clear signal & to stop rust/corrosion. Snagless connector enables easy installation & flexible disconnection of patch cord in wiring conduits

Out of Stock

Overview

About the Brand
Product Details

This 35-foot Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections.

Reliable Cat6a 10 Gigabit connections

Each cable is tested for up to 500 MHz frequencyand is more than suitable for 10GBase-T Ethernet networks.

Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance.The cable is designed to keep the datasignalstraveling through your network free from interference and is perfect in environments that are prone tolargeamount of EMI.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

Secured network connections

For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.

Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.

The C6ASPAT35BL is backed by StarTech.com's lifetime warranty for guaranteed reliability.

More from the Manufacturer

More from the Manufacturer


Specifications
General Information
Manufacturer StarTech.com
Manufacturer Part Number C6ASPAT35BL
Manufacturer Website Address http://www.startech.com
Brand Name StarTech.com
Product Name Cat.6a STP Patch Network Cable
Marketing Information This 35-foot Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections.

Reliable Cat6a 10 Gigabit connections

Each cable is tested for up to 500 MHz frequencyand is more than suitable for 10GBase-T Ethernet networks.

Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance.The cable is designed to keep the datasignalstraveling through your network free from interference and is perfect in environments that are prone tolargeamount of EMI.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

Secured network connections

For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.

Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.

The C6ASPAT35BL is backed by StarTech.com's lifetime warranty for guaranteed reliability.

More from the Manufacturer

More from the Manufacturer

Packaged Quantity 1 Each
Product Type Network Cable
Technical Information
Cable Type Category 6a
Cable Length 35 ft
Connector Type on First End RJ-45 Network - Male
Connector Gender on First End Male
Connector on First End Details 1 x RJ-45 Network - Male
Connector Type on Second End RJ-45 Network - Male
Connector Gender on Second End Male
Connector on Second End Details 1 x RJ-45 Network - Male
Connector Plating Gold
Contact Plating Gold
Shielding Yes
Jacket Type CMG
Device Supported
  • Network Device
  • Hub
  • Switch
  • Router
  • Print Server
  • Patch Panel
  • Computer
  • VoIP Device
  • PoE-enabled Device
American Wire Gauge 26 AWG
Data Transfer Rate 10 Gbit/s
Boot Type Snagless
Features
  • EMI/RF Protection
  • Molded
  • Booted
  • Strain Relief
  • Corrosion Resistant
  • Noise Protection
  • Stranded
  • Damage Resistant
  • Minimized Near-End Crosstalk (NEXT)
  • Rust Resistant
  • Flexible
  • Break Resistant
  • PoE
Physical Characteristics
Color Family Blue
Product Color Blue
Jacket Material Polyvinyl Chloride (PVC)
Weight (Approximate) 1.01 lb
Shipping Height 1.85"
Shipping Width 10.04"
Shipping Weight (Approximate) 1.05 lb
Miscellaneous
Environmentally Friendly Yes
Environmental Compliance
  • Restriction of Hazardous Substances (RoHS)
  • Waste Electrical and Electronic Equipment Directive (WEEE)
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Country of Origin China
Warranty
Limited Warranty Lifetime
Upsell Products

C2G 150 ft Cat6 Non Booted UTP Unshielded Network Patch Cable - Black - 150 ft Category 6 Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - Patch Cable - Black - 1 Each

  • Allows you to access all of the networked data, swiftly and securely
  • Features Category 6 cable type for your convenience and desired usability
  • Fully compatible with network devices

Item: CGO04126

Your Price

C2G 150 ft Cat6 Non Booted UTP Unshielded Network Patch Cable - Red - 150 ft Category 6 Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - Patch Cable - Red - 1 Each

  • Allows you to access all of the networked data, swiftly and securely
  • Features Category 6 cable type for your convenience and desired usability
  • Fully compatible with network devices

Item: CGO04168

Your Price

C2G 150 ft Cat6 Non Booted UTP Unshielded Network Patch Cable - Orange - 150 ft Category 6 Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - Patch Cable - Orange - 1 Each

  • Allows you to access all of the networked data, swiftly and securely
  • Features Category 6 cable type for optimal performance and better dependability
  • Fully compatible with network devices

Item: CGO04210

Your Price

C2G 150 ft Cat6 Non Booted UTP Unshielded Network Patch Cable - Gray - 150 ft Category 6 Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - Patch Cable - Gray - 1 Each

  • Experience a simpler way to connect devices with the entire business network
  • Features Category 6 cable type for optimal performance and better dependability
  • Fully compatible with network devices

Item: CGO04084

Your Price

StarTech.com Cat.6 UTP Patch Network Cable - 125 ft Category 6 Network Cable for Network Device, Workstation, Hub, Distribution Panel, Wall Outlet - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - 10 Gbit/s - Patch Cable - Gold Plated Connector - CMG - 24 AWG - Orange - 1 Each

  • High-quality 24 AWG copper wire
  • ETL verified
  • HIGH PERFORMANCE CAT6 ETHERNET CABLE: 100% copper for error-free Multi Gigabit 1/2.5/5Gbps connections; 10Gbps up to 160'; Fluke patch cord tested to comply w/ANSI/TIA-568-2.D Category 6; ETL Verified
  • QUALITY CONSTRUCTION: ETL & UL certified wire; 50-micron gold-plated connectors prevent rust/corrosion to avoid costly network downtime; High quality PVC jacket resists bending or fraying damage
  • EASY INSTALLATION: 125 foot snagless patch cord for easy installation & flexible disconnection in wiring conduits; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces

Item: STCN6PATCH125OR

Your Price

Reviews

Total Customer Reviews1

  • Overall Score:
  • (5.0 / 5)

Narrow reviews by:


Mike

My favorite pen

06/28/2018

  • Rating:
  • (5.0 / 5)

Mike

My favorite pen

06/28/2018

  • Rating:
  • (5.0 / 5)