Pro Strip Heavy Duty Floor Stripper is a professional-strength stripper designed for the removal of "tough to strip" finishes and sealers. That means it is formulated for effective stripping the first time, reducing the need for additional restrips. Floor stripper delivers fast penetration of built-up finishes and sealer layers and is specially formulated to penetrate and emulsify the toughest finishes and sealers. Variable dilution rates (1:4 and 1:10) using cool water offers a cost-effective solution. Pleasant cherry almond fragrance reduces complaints regarding floor-stripping odors.
Pro Strip Heavy Duty Floor Stripper is a professional-strength stripper designed for the removal of "tough to strip" finishes and sealers. That means it is formulated for effective stripping the first time, reducing the need for additional restrips. Floor stripper delivers fast penetration of built-up finishes and sealer layers and is specially formulated to penetrate and emulsify the toughest finishes and sealers. Variable dilution rates (1:4 and 1:10) using cool water offers a cost-effective solution. Pleasant cherry almond fragrance reduces complaints regarding floor-stripping odors.
Packaged Quantity
1 Carton
Product Type
Floor Stripper
Product Information
Cleaner Form
Liquid
Cleaner Volume
640 fl oz (20 quart)
Scent
Cherry Almond
Dilution System
Yes
Dilution Ratio
1:4, 1:10
Recommended Use
Sealer
Finish Remover
Odor Remover
Directions/Instructions
Use Instructions
Use appropriate personal protective equipment
Dilute product as follows:
Light Build-up of Floor Finishes: Dilute product between 1:8 (16 fl. oz. / gal.) and 1:10 (13 fl. oz. / gal.) with cool water
Heavy Build-up of Floor Finishes: Dilute product between 1:4 (32 fl. oz. / gal.) and 1:6 (24 fl. oz. / gal.) with cool water
Heavy Build-up of Concrete Sealers: Dilute product at 1:2 (64 fl. oz. / gal.) with cool water
Blockade areas to be stripped. Floors will be very slippery when stripper is applied. Exercise caution.
Apply liberal amounts of solution uniformly to floor with a mop. Start with the edges to give them more soak time. If splashing occurs, wipe off surfaces with a clean rag dampened with water.
Let stripper solution soak for 10-15 minutes. Mop agitate to loosen finish or sealer. Re-wet as necessary, do not allow stripper to dry on the floor. Longer soak times may be necessary in cases of extreme buildup.
Hand or machine scrub thoroughly using appropriate stripper pads or stripping brush
Pick-up all of the solution with a clean mop, wet vac or automatic scrubber
Mop up any "tracks" left by wet vacs or automatic scrubbers before they dry. Thoroughly rinse floor with clean water, using a mop and bucket.
Let floor dry completely before applying recommended Diversey brand floor sealer or finish
Important:
Do not use on wood, linoleum, rubber, marble, painted surfaces, on surface colored and acid dyed concrete floors as this product may harm these surfaces. Test for softening or color bleeding on asphalt floors before using.
